Making a One Touch
Recording (OTR)
You can set the DVD Recorder to record in 30-minute
increments by pressing the REC button.
1
If you want to record a TV channel, press
the PROG ( / ) or number buttons to
select a desired channel.
If you want to record through a
connected external component, press the
INPUT button to select an appropriate
external input (AV1, AV2, AV3 or DV).
TV PROGRAMME: 1 to 99
2
Press the REC button to start recording.
OTR Mode
0:30
Press the REC button repeatedly to adjust
3
the desired recording time.
0:30
1:00
The timer counter decreases by the
minute from 8:00 to 0:00, then the DVD
NOTE
Recorder stops recording.
46
- English
... 8:00
Off
To view the current status of the disc and progress
of recording : Press the INFO button, and
information about the disc will appear.
DVD-RAM(VR)
Disc Name
Total Title
15
Total Playlist
2
Recordable Time 02:12 SP
Protection
Not Protected
Screen
Recording : PR 1 [SP]
01 JAN 2005 SAT
Press the INFO button once again.
Then you can check the information about the title
being recorded.
DVD-RAM(VR)
Name
01/JAN/2005 12:00 PR
1
Recording Title
15
Created Time
01/JAN/2005 12:00
Recording Time
00:02:05
01 JAN 2005 SAT
30 seconds before the recording is done, a
message asking whether you want the recorder to
power off when the recording is done, will appear
on your screen.
OTR is going to be ended soon
and power will be turned off automatically.
Press [OK] button to continue to use DVD-Recorder.
OK
To stop recording
Press the STOP (
) button. The message "Do you
want to stop recording?" is displayed.
Do you want to stop recording?
Yes
Press the œ √ buttons to select Yes, then press the
OK button.
Or press the STOP button again.
Disc Info
12:00
Recording Info
12:00
No