Before Using The Vacuum Cleaner; Using The Powerbrush - Miele Classic C1 Instructions D'utilisation

Masquer les pouces Voir aussi pour Classic C1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en
The illustrations referred to in the text
are shown on the fold-out pages at the
end of these operating instructions.
Before using the vacuum
cleaner
Connecting the Electro hose (see fig. 1)
a Insert the elbow into the suction
socket until it clicks into place.
b Insert the plug into the socket on the
inside of the carrying handle.
Disconnecting the Electro hose
c Remove the plug from the socket.
d Press the two release buttons at the
sides of the elbow and lift the hose
from the socket.
Connecting the hand piece and the
Electro Telescopic wand (see fig. 2)
a Insert the hand piece into the electro
telescopic wand until it clicks into
place. Use the inlet guides to direct
insertion.
b To release the hand piece from the
telescopic wand press the locking
button (see arrow) and pull the hand
piece away from the telescopic
wand.
10
All manuals and user guides at all-guides.com

Using the Powerbrush

The Powerbrush is particularly suitable
for cleaning and restoring crushed
carpet pile of wall to wall carpeting and
floor coverings subject to hard wear,
especially in high traffic areas.
The Powerbrush can also be used on
smooth floor surfaces.
Do not use the powerbrush on:
– (SEB 217-3 only) Floors with a
– High quality, hand knotted rugs, for
Connecting the Powerbrush to the
Electro Telescopic wand (see fig. 3)
a Insert the Electro Telescopic wand
b To release the parts, press the lock
For more information on use and care
please refer to the instructions supplied
with the Powerbrush.
Observe the cleaning instructions of
the floor manufacturer.
variable or uneven surface. The
brush could come into contact with
the floor and cause damage.
example Berber or Persian rugs, as
well as extremely long piled area
rugs and carpets. There is a danger
of the threads being pulled out. Turn
the Powerbrush off to vacuum these
types of floor coverings and use only
suction.
into the Powerbrush until it clicks into
place.
release button and pull the wand up
and out.

Publicité

Chapitres

Table des Matières
loading

Table des Matières