Breville BKC600XL Mode D'emploi page 13

BR9013 BKC600XL_IB_AMEND.qxp
Operating your Breville Gourmet Single Cup Brewer
8. The LCD screen will indicate 'BREWING', however
there may be a short pause before the brewing
process begins. The process lasts about 60
seconds and ends with a burst of air to remove
all liquid from the K-Cup ® .
There is extremely hot water in the K-Cup ®
Holder during the brewing process. To avoid risk of
injury, do not raise the Safety Locking Arm or open
the Brewing Chamber during the brewing process.
Following the brew, the LCD screen will indicate
'HEATING' as the Brewer heats the water for the
next brew cycle. This process lasts about 15
seconds. The pump will make a vibrating sound.
This is normal.
9. Raise the Safety Locking Arm, remove and
dispose of the used K-Cup ® . Use caution as the
K-Cup ® will be hot.
10. Enjoy your first cup of gourmet coffee, tea or
hot cocoa!
11. The LCD screen will indicate 'READY TO BREW',
indicating that the next K-Cup ® can be inserted
for the next brew cycle.
Brewing with the My K-Cup
The Breville Gourmet Single Cup Brewer™ comes
with a My K-Cup ® accessory. The dishwasher safe,
reusable My K-Cup ® allows you to use your own
grind of coffee so you can adjust the amount and
type of coffee to suit your tastes. Along with the
included measuring scoop, this accessory
conveniently stores in the easy open compartment on
top of the brewer.
1. Follow the instructions, Installing the Water Filter
(page 8) and the One-time Priming Process (page
9). The Brewer should be turned on and the
Water Tank should be filled and illuminated.
2. The LCD screen will indicate 'READY TO BREW'.
12
11/10/07 21:43 Page 12
If the 'BREW' button is not pressed in 60
seconds, the LCD screen will indicate 'OPEN
HEAD' and the 'BREW' button will be disabled
to prevent accidental activation. To re-activate
the brew sequence, open the Brewing Chamber
Head by raising and lowering the Safety Locking
Arm completely.
3. Place a cup or mug on the Drip Tray Plate. The
drip tray plate and drip tray can be removed to
accomodate taller mugs and travel mugs.
4. Open the storage compartment located on top of
the Brewer by pressing the finger indent on the
right side. Remove the My K-Cup ® accessory.
Note
5. Disassemble the My K-Cup ® accessory by
removing the Lid from the Holder in a counter-
clockwise direction. Remove the Filter Basket
from the Holder.
6. Wash the My K-Cup ® Lid, Filter Basket and
Holder in warm soapy water prior to first use.
Rinse and dry thoroughly.
7. Insert the Filter Basket into the Holder.
®
Accessory
™
continued
8. Use th
Note
1 level s
We reco
serving.
Or, if you
cup 5.25
If you gr
1. Start
2. Expe
3. Avoid
9. Raise
10. Place
Filter B
coffee
tables
on the
tables
the am
prefer
more
the gr
there a
upper
to sea
Press
brew
could
poor
chamb
Brewin
a. Rem
Cha
the
on
b. Ins
the
the
the