Working Instructions; Maintenance And Service; Maintenance And Cleaning - Bosch GSR 10,8 V-LIQ Professional Notice Originale

OBJ_BUCH-756-002.book Page 11 Monday, June 9, 2008 2:18 PM
Temperature Dependent Overload Protection
When using as intended for, the power tool can-
not be subject to overload. When the load is too
high or the allowable battery temperature range
of 0–70 °C is exceeded, the speed is reduced.
The power tool will not run at full speed until
reaching the allowable battery temperature.

Working Instructions

Apply the power tool to the screw only when
it is switched off. Rotating tool inserts can
slip off.
Craftsman Case (see figure D)
The craftsman case 13 can hold the power tool,
the respective battery charger, a spare battery
and additional accessories. The craftsman case
13 can be hung up with the utility hook 12.
Tips
After longer periods of working at low speed, al-
low the machine to cool down by running it for
approx. 3 minutes at maximum speed with no
load.
For drilling in metal, use only perfectly sharp-
ened HSS drill bits (HSS = High Speed Steel).
The appropriate quality is guaranteed by the
Bosch accessories program.
Before screwing larger, longer screws into hard
materials, it is advisable to predrill a pilot hole
with the core diameter of the thread to approx.
2
/ of the screw length.
3

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine (e. g., main-
tenance, tool change, etc.) as well as during
transport and storage, remove the battery
from the power tool. Unintentional actuation
of the On/Off switch can lead to injuries.
For safe and proper working, always keep
the power tool and the ventilation slots
clean.
Bosch Power Tools
When the battery is no longer operative, please
refer to an authorized after-sales service agent
for Bosch power tools.
If the power tool should fail despite the care tak-
en in manufacturing and testing procedures, re-
pair should be carried out by an after-sales ser-
vice center for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the type plate of the power tool.
After-sales Service and Customer Assis-
tance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
under:
www.bosch-pt.com
Our customer consultants answer your questions
concerning best buy, application and adjustment
of products and accessories.
In case of a claim, repair or purchase of replace-
ment parts or in case of queries or other prob-
lems, please contact your local dealer or Bosch
representative.
People's Republic of China
Website: www.bosch-pt.com.cn
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 800 8 20 84 84
Tel.: +86 (571) 87 77 43 38
Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King's Road
North Point, Hong Kong
Customer Service Hotline: +852 (21) 02 02 35
Fax: +852 (25) 90 97 62
E-Mail: info@hk.bosch.com
www.bosch-pt.com.cn
English | 11
2 609 140 527 | (9.6.08)