Hints And Tips - AEG FAVORIT 45502WO Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Starting a programme
1. Press the on/off button to activate
the appliance.
2. Close the appliance door.
3. Turn the knob until the programme
marker is aligned with the
programme you want to set.
The duration of the programme flashes
in the display.
4. Press Start.
• The programme starts and the
indicator of the washing phase is
on.
Starting a programme with
delay start
1. Set a programme.
2. Press Delay again and again until the
display shows the delay time you
want to set (from 1 to 24 hours).
• The delay time flashes in the
display.
3. Press Start to start the countdown.
The delay time stops flashing and comes
on with fixed light.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door while a programme
is running, the appliance stops. When

10. HINTS AND TIPS

10.1 General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the
environment.
• Remove larger residues of food from
the dishes into the waste bin.
• Do not pre-rinse dishes by hand.
When needed, use the prewash
programme (if available) or select a
programme with a prewash phase.
• Always use the whole space of the
baskets.
• When loading the appliance, make
sure that the dishes can be
completely reached and washed by
the water released from the spray arm
All manuals and user guides at all-guides.com
you close the door, the appliance
continues from the point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme will end.
Cancelling the delay start while
the countdown opearates
1. Press and hold Multitab and Delay
until the start indicator starts to flash.
2. Press Start to start the programme.
Cancelling the programme
Press and hold Multitab and Delay until
the appliance is in programme selection
mode.
Make sure that there is detergent is the
detergent dispenser before you start a
new programme.
End of the programme
When the programme is completed the
display shows 0:00 .
1. Press the on/off button or wait for
the Auto Off function to
automatically deactivate the
appliance.
2. Close the water tap.
nozzles. Make sure that items do not
touch or cover each other.
• You can use dishwasher detergent,
rinse aid and salt separately or you
can use the multi-tablets (e.g. ''3in1'',
''4in1'', ''All in 1''). Follow the
instructions written on the packaging.
• Select the programme according to
the type of load and degree of soil.
With the ECO programme you have
the most efficient use of water and
energy consumption for crockery and
cutlery with normal soil.
ENGLISH
31

Publicité

Table des Matières
loading

Table des Matières