28
www.aeg.com
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, turn the
knob counterclockwise until the
programme marker is aligned with
the last programme. Press and hold
simultaneously Multitab and Delay
until the indicators
start to flash.
2. Press Multitab.
• The indicators
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press Multitab again and again to
change the setting.
4. Press the on/off button to confirm
the setting.
6.3 Use of rinse aid and multi-
tablets together
When you activate the option Multitab,
the rinse aid dispenser no longer
releases rinse aid. However if you are
using multi-tablets and the drying results
are not satisfactory, we suggest to use
multi-tablets and rinse aid together. In
7. OPTIONS
Desired options must be
activated every time before
you start a programme. It is
not possible to activate or
deactivate options while a
programme is running.
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions. They can also
contain other cleaning or rinsing agents.
This option deactivates the release of
salt and rinse aid from the respective
All manuals and user guides at all-guides.com
,
and
continues to
= level 5.
this case you have to activate the rinse
aid dispenser.
The rinse aid dispenser will remain
activated until you modify the setting
again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
and
1. To enter the user mode, turn the
knob counterclockwise until the
programme marker is aligned with
go off.
the last programme. Press and hold
simultaneously Multitab and Delay
until the indicators
start to flash.
2. Press Delay.
• The indicators
• The indicator
• The display shows the setting :
3. Press Delay to change the setting.
4. Press the on/off button to confirm
the setting.
containers. The salt and rinse aid
indicators do not come on.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
How to activate Multitab
Press Multitab.
The related indicator comes on.
,
and
continues to
flash.
–
= rinse aid dispenser
deactivated.
–
= rinse aid dispenser
activated.
and
go off.