When using your Blaze appliance, please read and follow these basic precautions:
To reduce the risk of fire, electric shock, or injury, read and follow these basic precautions before installing/operating your
APPLIANCE INSTALLATION
This gas appliance must be installed in accordance with all local codes.
If installation is planned in an area with no local codes, the gas appliance must be installed in accord with the
National Fuel Gas Code ANSI Z223.1 and storage and handling of liquefied petroleum gases, ANSI/NFPA 58 or
CSA B149.1 natural gas and propane installation code.
CALIFORNIA PROPOSITION 65 WARNING
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which are
known to the State of California to cause cancer and birth defects or other reproductive harm. For more information
go to: www.P65Warnings.ca.gov
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage.
Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
Do not use the appliance as storage area for flammable materials. Keep area clear and free from combustible
materials, gasoline, and other flammable vapors and liquids. Failure to do so can result in death, explosion, or fire.
In Massachusetts: All gas products must be installed using a "Massachusetts" licensed plumber or gasfitter. A "T"
handle type manual gas valve must be installed in the gas supply line to this appliance. This applies to permanently
installed natural gas and propane installations. This does not apply to propane portable installations using a 20 pound
tank.
appliance.
EXPLOSION HAZARD
Blaze Instructional Book
Page | 7