BLAZE BLZ-4LTE2-NG Guide D'utilisation Et D'entretien page 28

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

immediately. (For rear burner, a slower turn of the knob is necessary. This allows gas to accumulate in the rear
burner to achieve ignition. Never use the rear burner with the warming rack in place)
5.
If the burner does not light in 5 seconds, turn the burners off and wait five minutes with the lid open until the gas
clears before attempting to light it again. Repeat the procedure or try the manual lighting procedure below.
6.
If the burner does not light after several attempts, immediately close all gas valves and consult an
authorized service technician.
7.
Upon successful lighting, repeat the process on the other burners you wish to light.
8.
To shut off the burners, rotate the knob and turn to OFF. It is normal to hear a popping sound when the burners
are turned off.
9.
Close the valve at the gas supply.
Manually Lighting the Main Burners
WARNING: Do not use standard size matches or cigarette lighters to perform match-lighting procedures. Serious burns can
occur and lighters can explode.
Open the hood.
1.
If you have just attempted to light the burner, allow five minutes for any accumulated gas to dissipate. Use
2.
caution by standing as far away from the burners as possible. Do not put your hands, arms, head or any body
parts close to the grill when lighting.
Hold your open flame to the top of the Lighting Tube. See below picture.
3.
Push in and turn the control knob to HIGH.
4.
If the burner does not light after five seconds, turn the control knobs to the OFF position.
5.
Wait five minutes until the gas clears before attempting to light it again.
6.
If the burner does not light after several attempts, immediately close all gas valves and consult an authorized service
7.
technician.
Blaze Instructional Book
Page | 28

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Blz-4lte2-lpBlz-5lte2-ngBlz-5lte2-lp

Table des Matières