Transportation And Changing Of Installation Position; Before Calling Your After Sales Service - Whirlpool W84TI 31 X Mode D'emploi

TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
• The original packaging and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick packaging, bands or strong cords and follow the
instructions for transportation on the package for re-transportation.
• Remove movable parts (shelves, accessories, vegetable bins etc.) or fix them into the fridge
against shocks using bands during re-positioning and transportation.
Always carry your fridge in the upright position.
Repositioning the door
• It is not possible to change the opening direction of your fridge door, if the door handles on your
fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your fridge can be changed, you should contact the nearest
Authorised Service to have the opening direction changed.
BEFORE CALLING YOUR AFTER SALES
SERVICE
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or when a
problem occurs in the appliance. Warning codes are displayed in the Freezer and Cooler Indicators.
MEANING
"Failure Warning"
What to do if your refrigerator does not operate:
Check that:
• Your fridge is plugged in and switched on,
• The fuse is not blown and there is not a power cut,
• The thermostat setting is in the on the "1" position,
• The socket is no longer functioning. To check this, plug in an appliance that you know is working
into the same socket.
What to do if your refrigerator performs poorly:
Check that:
• You have not overloaded the appliance,
• The doors are fully closed ,
• There is no dust on the condenser,
• There is enough space for air circulation at the rear and side of the appliance.
If your fridge is operating too loudly:
Normal Noises
Cracking (Ice cracking) noise:
• During automatic defrosting.
• When the appliance is cooled or warmed (due to expansion of appliance material).
Click noise: Heard when the thermostat switches the compressor on/off.
Compressor noise:
• Normal motor noise: This noise means that the compressor is operating normally
• The compressor may cause more noise for a short time when it is first activated.
WHY
There is/are some part(s) Out of order or
there is a failure in cooling process
EN - 13
WHAT TO DO
Call Service for assistance as
soon as possible.