Assembling The Kubbe Attachment; Assembling The Biscuit Attachments - SilverCrest SFW 350 C1 Mode D'emploi

Assembling the kubbe attachment

Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing
meat grinder".
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing
NOTICE
► For the kubbe attachment
required! If need be, remove them both from the meat grinder casing
3) Coat all metal parts with cooking oil.
4) Insert the two plastic parts of the kubbe attachment
the bottom kubbe attachment
grinder casing
5) When everything has been attached correctly, screw the ring clamp
on hand-tight.
6) Assemble the meat grinder casing
meat grinder".

Assembling the biscuit attachments

Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing
meat grinder".
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing
NOTICE
► For the biscuit attachment
required! If need be, remove them both from the meat grinder casing
3) Coat all metal parts with cooking oil.
4) Pull the pattern strips
5) First place the plastic disc and then the metal disc of the biscuit attachment
into the meat grinder casing
ment
openings in the meat grinder casing
6) After everything has been correctly assembled, screw the ring clamp
back on hand-tight.
│ GB │ IE │ NI
■ 8
All manuals and user guides at all-guides.com
.
, the cross blade
ring are located in the openings in the meat
.
.
, the cross blade
away from the front of the biscuit attachment
(see fold-out side). Insert the biscuit attach-
. so that the fixings on the biscuit attachment
as described under "Assembling the
with the spring
so that the fixings on
as described under "Assembling the
as described under "Assembling the
with the spring
. are located in the
.
is not
.
back
is not
.
.
SFW 350 C1