Assembling The Sausage Stuffer Attachment - SilverCrest SFW 350 C1 Mode D'emploi

5) Place your selected cutting disc
the fixings on the cutting disc
grinder casing
6) After everything has been correctly assembled, screw the ring clamp
back on hand-tight.
7) The ready-assembled meat grinder casing
connector to the motor unit
– Insert the meat grinder casing
arrow on the meat grinder casing
motor unit
– Lightly press the meat grinder casing
the feeding shaft on the meat grinder casing
(Fig. B) so that the arrow on the feeding shaft points to the symbol
When the meat grinder casing
springs out.
– Finally, place the feeding tray
– To dismantle it, press the locking button
to the right (Fig. B)
Assembling the sausage stuffer attachment
Unfold the fold-out side - there you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing
meat grinder".
2) Dismantle all parts which are fitted to/in the meat grinder casing
clean them.
3) Coat all metal parts with cooking oil.
4) Put the transport screw
the meat grinder casing
5) Insert the sausage disc
located in the openings in the meat grinder casing
6) Then place the sausage stuffer attachment
7) Screw the ring clamp
8) Assemble the meat grinder casing
meat grinder".
SFW 350 C1
All manuals and user guides at all-guides.com
are located in the openings in the meat
.
:
. The locking button
. You can now pull the meat grinder casing
, the spring
.
so that the fixings on the sausage disc
on hand-tight.
into the meat grinder casing
is connected by a bayonet
into the motor unit
lies against the symbol
presses itself in (Fig. B).
in and at the same time turn
into the middle position
engages, the locking button
on top of the feeding funnel.
and turn the feeding funnel
as described under "Assembling the
and the cross blade
.
before the sausage disc
as described under "Assembling the
GB │ IE │ NI
so that
such that the
on the
.
out.
and
back into
are
.
│
7 ■