Product Description; First Use; Control Panel - IKEA FULLGORA Manuel

ENGLISH

Product description

1
1
2
2
3 3
4
5
5 6
10 9
6 7
7 8
9
8
10 11

First use

Connect the appliance to the power supply. The ideal food
storage temperatures are already factory-set (intermediate).
Wait at least two hours before switching the appliance on, to

Control panel

Refrigerator operation
The appliance's refrigerator compartment features a control
panel.
It is possible to set a different temperature with the
A C
E
A
Fridge System Control
B
Temperature display
C
On/Stand-by
D
Fast cooling
E
Vacation (holiday mode)
F Turning off the sound alarm
G
Temperature setting
Fridge System Control
This function automatically works to ensure the optimal
conditions to preserve the stored food. To deactivate the "Fridge
System Control", press and hold D and F buttons at the same
time for 3 seconds until an audible signal sounds and "Fridge
System Control" icon turns off as confirmation that the feature
has been deactivated. To reactivate this function repeat the
same procedure.
Note: Deactivation of the function switch-off the FAN in the
fridge.
13
14
11
12
12
13
G
button.
B D
G F
To download the full version visit www.ikea.com
1
Control panel
2
LED Light
3
Fan
4
LED Light
5 Multiflow
6 Bottle rack
7
Sensor cover
8 Ratin plate
9 Crisper Drawer
10
Glass Shelves
Lower drawer
11
Bottle holder with divider
12
13
Door balcony
Characteristics, technical data and images may vary according
to the model.
Accessories
Egg tray
1x
ensure that the refrigerant circuit is fully efficient
Note: after being switched on, the appliance needs 4-5 hours in order
to reach the correct temperature to store a typical volume of food.
On/Stand-by
This function turns On/Stand-by the refrigerator. To put the
product in Stand-by, press & hold the On/Stand-by button for 3
seconds. When the appliance is in Stand-by, the light inside the
refrigerator compartment does not work. Remember that this
operation does not disconnect the appliance from the power
supply. To switch the appliance On again, simply press the On/
Stand-By button .
Note: this procedure does not disconnect the appliance from
the electricity supply.
Temperature display
The display shows the refrigerator compartment temperature
(between 2°C and 8°C).
Vacation (holiday mode)
This function can be activated to reduce the energy
consumption of the appliance during a period of absence.
Before activating the feature, all perishable food should be
removed from the refrigeration compartment and make sure
that the door is closed properly, since the refrigerator will
maintain a suitable temperature to prevent the formation of
unpleasant odors (+12°C).
To activate/ deactivate press the Vacation mode button for 3
seconds. When the function is enabled, the related symbol will
light up and the temperature of the refrigerator compartment
will be set to a higher setpoint (the temperature display will
show the new temperature setpoint of +12°C).
Changing the temperature setpoint will automatically deactivate
the function.
6