Extel WECA 109058 Mode D'emploi Et D'installation page 33

b - When removing the rear panel the pins of the lock appear on two columns out of 7:
5 red, 8 blue and one empty (you should not intervene on C).
The red pins serve for the code, the blue pins are "inactive" and the empty pin is activated by the "C"
button, AND MUST NEVER BE REMOVED.
c - The pins are released by pressing the C button and then can be removed with supplied
tweezers.
If the red and blue pins are moved in the lock this will modify the existing 5-character code.
If the red and blue pins are replaced with those supplied as spare pins, this enables modifying the
numbers of characters used in this code.
C button
VERY IMPORTANT:
All "rectangular" recesses have to be turned
outward from the casing.
All manuals and user guides at all-guides.com
Please note that the pins have to be properly
positioned according to the column in which
they are placed.
REMINDER:
Keys with red pins = active keys
Keys with blue pins = inactive keys
8EN
Jumper head