Connecting A Satellite Receiver; Installing And Connecting The Tv - Sony WEGA KZ-32TS1 Mode D'emploi

Connecting a Satellite Receiver

AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver's SATELLITE
IN jack.
2
Using AUDIO and S VIDEO cables, connect the satellite receiver's AUDIO
and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks.
3
Connect the supplied 75-ohm coaxial cable from your cable or antenna to the
TV's VHF/UHF jack.
Rear of TV
VIDEO IN 1 COMPONENT VIDEO IN 1
R AUDIO L VIDEO S VIDEO
R AUDIO L
R AUDIO L
VIDEO IN 2 COMPONENT VIDEO IN 2 / RGB IN
S VIDEO
VMC-810S/820S (not supplied)
YC-15V/30V (not supplied)
Tip
If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead
of the S VIDEO cable.

Installing and Connecting the TV

AUDIO OUT
Y P P R L
B R
CONTROL
S IN
Y/G P /B P /R HD VD
B R
OUT
SUB
WOOFER
Satellite receiver
VHF/UHF
AC IN 75-ohm
coaxial
cable
(supplied)
Satellite
antenna
cable
US
9
(US)