Connecting The Display Unit To The Media Receiver Unit - Sony WEGA KLV-30MR1 Mode D'emploi

Connecting the Display Unit to the Media Receiver
Unit
• Use the supplied display interface cable.
• Use the supplied mains lead for the display unit (Type C-4, Type BF or Type C-5, see page 13).
1
Connect the supplied display interface cable and the supplied mains lead for the display unit to the
display unit.
Tighten the
screw slowly
until the screw
is stabilized.
Mains leads
(supplied)
After making all
connections,
connect to a wall
outlet.
Do not connect to the mains before all connections are completed.
AC IN WHITE BLACK
DISPLAY SIGNAL IN
Display interface
cable (supplied)
To Media receiver unit.
GB
(continued)
19
Installation