Operating Video Equipment With Your Tv Remote Control; Programming The Remote Control - Sony WEGA KZ-32TS1 Mode D'emploi

Watching the TV
Operating Video
Equipment with Your TV
Remote Control

Programming the remote control

MUTING
VCR/DVD SAT/CABLE
FUNCTION
SYSTEM
OFF VCR/DVD SAT/CABLE
SLEEP
WIDE MODE DISPLAY
PICTURE
MODE VIDEO COMPONENT RGB
1 2 3
4 5 6
7 8 9
JUMP ENTER
0
FAVORITES
TV/SAT
POWER
SAVING
VOL CH
CODE SET
30
(US)
5
POWER
TV
TV
2
3
4
MTS/SAP
GUIDE
MENU
1
The remote control is preset to operate Sony brand
video equipment.
Sony equipment Programmable code number
Beta, ED Beta VCRs
303
8mm VCR 302
VHS VCR 301
DV VCR 348
DVD player
751
If you have video equipment other than Sony brand
that you want to control with the TV's remote
control, use the following procedures to program the
remote control.
Note
The equipment must have infrared (IR) remote capability in
order to be used with this remote control.
From the "Manufacturer's codes" listed on page 31,
select the three-digit code number for the
manufacturer's code of your equipment. If more than
one code number is listed, start with the number
listed first. Use the code number to complete the
following procedure.
1
Press CODE SET.
2
Press the function button you want to program.
To program a cable box or a satellite receiver
Press SAT/CABLE (FUNCTION).
To program video equipment
Press VCR/DVD (FUNCTION).
3
Enter the three-digit manufacturer's code number
using the 0-9 buttons.
4
Press ENTER.
5
To check if the code number works, aim the
TV's remote control at the equipment and press
the VCR/DVD and/or SAT/CABLE (POWER)
button that corresponds with that equipment. If it
responds, the programming is completed. If not,
try using the other codes listed for that
manufacturer.
Tips
• If more than one number is listed, try entering them one by
one until you come to the correct code for your equipment.
• If you enter a new code number, the code number you
previously entered at that setting is erased.
• In some rare cases, you may not be able to operate your
equipment with the Sony remote control. In this case, use the
equipment's own remote control unit.