Table des Matières
Publicité
13.2 Certificats
Des versions téléchargeables de tous les certificats sont disponibles
sur www.mtssensors.com depuis la page d'accueil de chaque produit.
En cas de difficulté à obtenir les certificats sur le Web, contacter le
Support technique MTS : une copie électronique vous sera envoyée.
13.3 NEC (FM)
B
13.3.1 Sécurité intrinsèque
13.3.1.1 Conditions d'utilisation spéciales
1. Le boîtier de l'appareil contient de l'aluminium et peut constituer
un risque potentiel d'inflammation par impact ou friction. Prendre
toutes les précautions pendant l'installation et l'utilisation pour
éviter les risques d'impact ou de friction. (En cas d'installation
dans le cadre d'une Approbation GA).
2. La température ambiante maximale autorisée du transmetteur
USE FM LOGO ARTWORK
de niveau numérique/analogique Level Plus est de 71 °C. Pour
éviter les effets de la température du processus et d'autres effets
thermiques, s'assurer que la température ambiante autour et dans
le boîtier du transmetteur ne dépasse pas 71 °C.
3. Certains modèles contiennent des pièces du boîtier de fabrication autre
ENTITY PARAMETERS:
que métallique, pour éviter le risque d'étincelle électrostatique, la
surface non-métallique ne doit être nettoyée qu'avec un tissu humide.
SEE PRINT REFERENCE CHART
B
13.3.1.2 Étiquettes
MTS Systems Corporation
Sensors Division
3001 Sheldon Dr.
NOTES:
Cary, NC 27513
1. STANDARD LETTERING UNIVERS 55
A
OR ITC GARAMOND BOOK.
B
2. MATERIAL TO BE SCREEN PRINTED ALUMINUM WITH SATIN
Model No:
BACKGROUND AND BLACK TEXT OR LASER ETCHED ALUMINUM.
Serial No:
∆
3.
Date :
4. DIMENSIONS IN BRACKETS [ ] ARE IN INCHES.
5. MATERIAL: .8 [0.03] THICK ALUMINUM
6. REFER TO TABLE 1 FOR "L1" & "L2" DIMENSIONS.
NOTES:
1. STANDARD LETTERING UNIVERS 55
OR ITC GARAMOND BOOK.
WARNING: REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
2. MATERIAL TO BE SCREEN PRINTED ALUMINUM WITH SATIN
A
BACKGROUND AND BLACK TEXT OR LASER ETCHED ALUMINUM.
∆
3.
4. DIMENSIONS IN BRACKETS [ ] ARE IN INCHES
5. MATERIAL: .8 [.03] THICK ALUMINUM
Fig. 18 : Étiquette FM sécurité intrinsèque, Modbus ou DDA, boîtier NEMA
6. REFER TO TABLE 1 FOR "L1" & "L2" DIMENSIONS.
USE MTS LOGO
10 POINT SIZE
4.5 POINT TEXT SIZE
MTS TO PRINT
MODEL NO.
SERIAL NO.
DATE CODE.
4.5 POINT TEXT SIZE
MTS TO PRINT
MODEL NO.
8 POINT TEXT
SERIAL NO./DATE CODE
SIZE
Level Plus Transmitter
®
8.97 [.35]
MTS TO PRINT
MODEL NO.
SERIAL NO./DATE CODE
INDICATES CRITICAL DIMENSIONS.
INTRINSICALLY SAFE
FM
US
CL. I, Div. 1, GR. ABCD
APPROVED
8.97 [.35]
CL. I, Zone 0/1, AEx ia IIC T4
Ta = -50°C to +71°C
C
when connected in accordance
with FM approved
installa on
B
drawing # 651543-1
A
R
E
V
P/N 551629-1 Rev B
INDICATES CRITICAL DIMENSIONS.
PROPRIETARY DATA
69.85 [2.75]
THE INFORMATION AND DESIGN(S) DISCLOSED
HEREIN ARE THE PROPERTY OF MTS SYSTEMS
CORPORATION AND MAY NOT BE USED,
REPRODUCED OR DISCLOSED IN ANY FORM
EXCEPT AS GRANTED IN WRITING BY MTS
SYSTEMS CORPORATION. THIS RESTRICTION
C
EXCLUDES INFORMATION THAT IS IN THE
2
ARTWORK
2
Fig. 19 : Étiquette FM sécurité intrinsèque, HART
2
R3.30 [.13]
MTS Systems Corporation
Sensors Division
3001 Sheldon Drive, Cary, N.C. 27513
***NO REVISIONS SHALL BE MADE WITHOUT TH
INTRINSICALLY SAFE
7847
CL. I, Div. 1, GR. ABCD
B
3.47 [.14]
28.70 [1.13]
CL. I, Zone 0/1, AEx ia IIC T4
Ta = -50°C TO +71°C ; IP65
WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY
A
7570
1.78 [.07]
REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
REV
ECO #
Fig. 20 : Étiquette FM sécurité intrinsèque, Modbus ou DDA, boîtier à cavité simple ou double
PROPRIETARY DATA
15.80 [.62]
THE INFORMATION AND DESIGN(S) DISCLOSED
MTS Systems Corporation
Sensors Division
HEREIN ARE THE PROPERTY OF MTS SYSTEMS
3001 Sheldon Drive, Cary, N.C. 27513
CORPORATION AND MAY NOT BE USED,
REPRODUCED OR DISCLOSED IN ANY FORM
EXCEPT AS GRANTED IN WRITING BY MTS
INTRINSICALLY SAFE
SYSTEMS CORPORATION. THIS RESTRICTION
CL. I, Div. 1, GR. ABCD
***NO REVISIONS SHALL BE MADE WITHOUT THE NOTIFICAT
3.47 [.1
CL. I, Zone 0/1, AEx ia IIC T4
EXCLUDES INFORMATION THAT IS IN THE
Ta = -50°C TO +71°C ; IP65
WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY
IP65
8256
;
PUBLIC DOMAIN OR WAS LEGITIMATELY IN THE
REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
34.69 [1.37]
PRIOR POSSESSION OF THE RECIPIENT.
7
8
4
7
Fig. 21 : Étiquette FM sécurité intrinsèque, HART
7570
1.78 [.07]
2
E
C
O
#
I
25
I
***NO REVISIONS SHALL BE MADE WITHOUT THE NOTIFICAT
8256
8 POINT TEXT
Level Plus Transmitter
MTS Systems Corporation
Sensors Division
3001 Sheldon Dr.
Cary, NC 27513
Model No:
Serial No:
Date :
FM
US
APPROVED
"L1"
∆ "L2"
WARNING: REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
USE MTS LOGO ARTWORK
14.0 POINT SIZE
69.85 [2.75]
7.5 POINT SIZE
Level Plus Transmitter
R
"L1"
∆
"L2"
IP RATING WAS 66
USE MTS LOGO ARTWORK
RELEASE TO PRODUCTION
14.0 POINT SIZE
DESCRIPTION
7.5 POINT SIZE
Level Plus Transmitter
R
86.30 [3.40]
- THREAD DEPTHS ARE TO MIN. FULL THD
- DRILL DEPTHS ARE TO FULL DIA.
- REMOVE BURRS AND SHARP EDGES
- DO NOT SCALE PRINT
P I
- MACHINED SURFACE FINISH 3.2uM [125
RELEASE FOR PRODUCTION
UNLESS OTHERWISE SPECIFIED
TOLERANCES
0 PLACES
MM
0.5
- THREAD DEPTHS ARE TO MIN. FULL THDS
- DRILL DEPTHS ARE TO FULL DIA.
Level Plus
Tank Slayer
®
Manuel d'utilisation
SIZE
®
INTRINSICALLY SAFE
CL. I, Div. 1, GR. ABCD
CL. I, Zone 0/1, AEx ia IIC T4
Ta = -50°C to +71°C
IP65
;
when connected in accordance
with FM approved
installa on
drawing # 651543-1
P/N 551629-1 Rev B
1
, boîtier NEMA
®
FM
APPROVED
INSTALL PER DRAWING # 651543-1
SUPPLY VOLTAGE: 28 VDC
P/N 551634-X Rev C
UNLESS OTHERWISE SPECIFIE
TOLERANCES
0 PLACES
1 PLACE
FM
MM
MM
APPROVED
0.5
0.1
INSTALL PER DRAWING # 651544-1
SUPPLY VOLTAGE: 28 VDC
ADDED "D1"
P/N 551642-X Rev C
R
A
T
N I
G
W
A
S
6
6
®
, boîtier à cavité simple ou double
NOTES:
4.0 POINT TEXT SIZE
D
E
S
C
R
P I
I T
O
N
1. STANDARD LETTERING
(TYP.)
TITLE
OR ITC GARAMOND B
2. DIMENSIONS IN BRAC
1 PLACE
ANGLES
IN INCHES.
MM
0.1
3. MATERIAL: 3M 7883 M
FIRST
POLYESTER FOIL W/G
ANGLE
ADDED "D1"
®
R
2
1.78 [
1
DASH
3
#
-1
1.78 [
-2
FM
4.5
17.53
"D
SEE
4.0 POINT
(TYP.)
17.53
ANGLE
"D
SEE
(AC
m
Publicité
Table des Matières
