Getting To Know Your Appliance; Controls And Burners - Junker JG16BB52 Notice D'utilisation

en

Getting to know your appliance

:
Warning – Risk of injuries!
Pans which are damaged, are not the right
■
size, hang over the edge of the hob or are
not positioned correctly can cause serious
injuries. Follow the advice and warnings
provided relating to the cooking pans.
Risk of injury!
Incorrect repairs are dangerous. Repairs
■
may only be carried out, and damaged
power and gas lines replaced, by an after-
sales engineer trained by us. If the
appliance is faulty, unplug the mains plug or
switch off the fuse in the fuse box. Shut off
the gas supply. Contact the after-sales
service.
Risk of injury!
If a control knob is too stiff to turn or it is
■
loose, it must not be used. Contact our
after-sales service immediately to have the
control knob repaired or replaced.
:
Warning – Risk of electric shock!
Do not clean the appliance using steam
cleaners.
12
*Getting to know your
appliance
Y ou can find your appliance and the burner powers in
G e t t i n g t o k n o w y o u r a p p l i a n c e
the model overview. ~ Page 2

Controls and burners

Each control knob is marked with the burner it controls.
You can use the control knobs to set the output
required in each case to various positions between the
maximum and the minimum settings.
Indicators
Burner controlled by control knob
"
Ú Switched-off burner
Highest power setting and electric ignition
ª
Lowest power setting
«
It is essential to ensure that all the burner parts and pan
supports are correctly installed for the appliance to
work correctly. Do not swap the burner caps around.
Burner parts
1 Ignition plug
2 Thermocouple
3 Burner cup
4 Burner cap