Installation - X-Rite vipFLEX2 Manuel De Démarrage

7

Installation

Please read these instructions before using your vipFLEX
1. Install the PlateQuality Flexo application software onto your PC. The software can be found on the vipFLEX
2. Insert the dongle into a free USB port (if the USB dongle is not connected, the software will start in a demo mode).
2
3. Connect the vipFLEX
connected to a USB HUB without a separate power supply).
4. Launch the PlateQuality Flexo application software on your PC.
5. When launching for the first time, the PlateQuality Flexo software will ask for the calibration code and the serial number of
2
the vipFLEX measuring device, as well as the serial number and expiration date of the vipFLEX
be found on the rear of the vipFLEX
2
X-Rite vipFLEX Quick Start Guide
All manuals and user guides at all-guides.com
2
:
measuring device to your computer using the USB cable (the vipFLEX
2
measuring device; the data of the vipFLEX
Qui c k Start Gui d e
2
will not function if it is
2
Target. The device data can
2
Target can be found on the vipFLEX
E N G L I S H
2
application CD.
2
Target.
7