JVC TH-V70 Manuel D'instructions page 39

5 Adjust the speaker output levels
(–10 dB to +10 dB).
Adjust the center speaker and rear speaker levels
comparing to the sound from the front speakers.
• To adjust the center speaker level, press CENTER +/–.
• To adjust the left rear speaker level, press REAR-L +/–.
• To adjust the right rear speaker level, press REAR-R +/–.
6 Press TEST again to stop the test tone.
NOTES:
• When selecting "PL II MUSIC," "PL II MOVIE," "DOLBY D," or "DTS
SURR" as the surround mode, the SURROUND indicator lights up.
• You can adjust the speaker output levels without outputting the test
tone.
• When selecting DVD, AUX, or AUX DIGITAL as the source, you can
also adjust the speaker output levels using the choice menu. See
pages 55 and 61.
• When you have set the center speaker and rear speakers to
"NONE," the test tone does not come out from those speakers, and
you cannot adjust the output level of those speakers. (See pages
60 and 66.)
• You can output the test tone in any surround mode, or even when
surround mode is not activated.
Using DAP Modes and All
Channel Stereo
Once you have adjusted the sound, the adjustment is
memorized for each source.
• You cannot use the DAP modes and All Channel Stereo if
the rear speakers are deactivated.
• You cannot adjust the effect level for "ALL CH ST."
From the remote control ONLY:
TOP MENU MENU
–
CONTROL SUBWOOFER
1
VCR
–
CENTER
4
TV
Sound setting
–
SLEEP
7
buttons
–
SETTING
10
TV RETURN
ON
SCREEN
CHOICE
1 Start playing 2 channel software—either
analog or Linear PCM.
When playing a conponent connected to the AUX IN or
the DIGITAL IN jack, change the source to AUX or AUX
DIGITAL.
PROGRESSIVE
ZOOM
SOUND button
–
SOUND
+
EFFECT
EFFECT button
2 3
+
TEST
5 6
+
REAR-L
8 9
+
REAR-R
0
+10
FM MODE 100+
AUDIO/
TV/VCR
CATV/DBS
ENTER
SURROUND
MODE
SURROUND
MODE button
2 Press SURROUND MODE repeatedly until one
of the DAP modes—"LIVE CLUB," "DANCE
CLUB," "HALL," "PAVILION"—or "ALL CH ST."
appears on the display.
The DSP indicator also lights up on the display window.
If you like to adjust sound, go to step 3.
3 Press SOUND.
The 10 keys are activated for sound adjustments.
4 Adjust the speakers output levels
(–10 dB to +10 dB).
• To adjust the left rear speaker level, press REAR•L +/–.
• To adjust the right rear speaker level, press REAR•R +/–.
For "ALL CH ST." only:
• To adjust the center speaker level, press CENTER +/–.
5 For DAP modes only:
Press EFFECT to select the effect level (1 to 5)
you want.
Each time you press the button, the effect level changes
as follows:
] DSP EFFECT 1 ] DSP EFFECT 2 ] DSP EFFECT 3
] DSP EFFECT 4 ] DSP EFFECT 5 ] (back to the
beginning)
As the number increases, the selected mode becomes
stronger (normally, set it to "EFFECT 3").
NOTES:
• When selecting DVD, AUX, or AUX DIGITAL as the source, you can
also adjust the speaker output level using the choice menu. See
pages 55 and 61.
• You cannot select any DAP mode and All Channel Stereo when
software encoded with Dolby Digital or DTS Digital Surround is
played back.
36