HOW TO CONTROL YOUR MODEL
• Raise the tyres off the ground
• Turn the steering wheel to the right and left as far as it will go. The
wheels are to follow the steering direction.
• If the wheels operate in the opposite direction, operate the servo
Reverse switch (ST in position REV).
• To regulate the driving speed, actuate the throttle/brake
- backwards (forward driving, accelerating) or
- forwards (braking, reversing)
Left
Right
BINDING
Linking the transmitter identification code to
the receiver (binding)
NOW YOU CAN SET OFF ON YOUR TRAVELS
1
Avoid continuous running. Allow the motor to cool down approxi-
mately 30 minutes after running.
Neu
tral
Left
If the vehicle stops responding to the transmitter, switch the trans-
mitter and vehicle off and then back on again.
The transmitter and vehicle will link up with each other again.
2
Never run the model on public roads or streets, as it could
endanger traffic.
Right
driving forward,
to give speed
braking, reverse
movement
15 // GB