AL-KO Solo 116 Mode D'emploi page 21

„
Only empty the fuel tank outdoors.
„
If petrol has spilled out or been spilt:
„
Do not start the engine.
„
Avoid ignition attempts.
„
Clean the machine.
„
Allow leftover fuel to evaporate
Preparing a fuel mixture
If a mixing ratio of 50:1 is used, we recommend us-
ing a special high-quality 2-stroke oil.
In the case of branded 2-stroke oils, we recommend
a mixing ratio of 25:1.
Tables of fuel mixing ratios
Mixing procedure
25 parts petrol:
1 part mixing oil
2-stroke oil
Mixing procedure
50 parts petrol:
1 part mixing oil
2-stroke oil
Pour petrol and corresponding oil into a suitable con-
tainer in accordance with the table. Mix both parts
thoroughly.
Startup
Caution!
Always carry out a visual inspection before starting
up the machine.
„
Before use, ensure that all screws, nuts and bolts
on the device are securely fastened.
„
The machine must not be used with loose, dam-
aged or worn cutting parts and/or fastening ele-
ments.
„
Replace damaged or worn parts with original
spare parts.
„
Always operate the trimmer with the guard.
„
Always observe the operating instructions provid-
469680_a
Petrol Mixing oil
1 l 40 ml
3 l 120 ml
5 l 200 ml
Petrol Mixing oil
1 l 20 ml
3 l 60 ml
5 l 100 ml
ed by the manufacturer of the engine.
„
Observe local regulations regarding operating
times.
Starting the engine
Warning!
Never run the engine indoors.
Toxic fumes!
Before start-up, shorten the cutting string to
13 cm to avoid overloading the engine.
Choke settings:
CHOKE
When starting the machine, please note:
1. Lay the strimmer flat on the ground without
obstacles.
2. Make sure that the cutting tool is not touching
other objects or the ground.
3. Adopt a safe stance.
4. Hold the machine securely with the left hand.
Take hold of the starter cord with the right
hand.
5. Do not stand or kneel on the support bar.
„
Always pull the starter cord straight out. Do not
let it snap back too quickly.
GB
RUN
21