Assembly; Fitting The Handlebar - Husqvarna 232R Manuel D'utilisation

Fitting the handlebar (232R)
• Remove the screw at the rear of the throttle handle.
• Slide the throttle handle onto the right side of the
handlebar, (see diagram).
• Align the screw hole in the throttle handle with the hole
in the handlebar.
• Refit the screw in the hole in the rear of the throttle
handle.
• Screw the screw through the handle and handlebar.
Tighten it.
• Unscrew the knob from the handlebar mounting.
• Position the handlebar as shown. Fit the mounting
components and tighten the knob lightly.
• Put on the harness and hang the machine from the
support hook. Now make a final adjustment so that
50 – English

ASSEMBLY

the machine is in a comfortable working position when
it hangs from the harness. Tighten the knob.
Fitting the handlebar (235R,
235FR)
• Remove the screw at the rear of the throttle handle.
• Slide the throttle handle onto the right side of the
handlebar, (see diagram).
• Align the screw hole in the throttle handle with the hole
in the handlebar.
• Refit the screw in the hole in the rear of the throttle
handle.
• Screw the screw through the handle and handlebar.
Tighten it.
• Remove the mounting components from the
handlebar mounting.
• Position the handlebar as shown. Fit the mounting
components and tighten the knob lightly.