Valor HORIZON Clearview 645CFV Guide D'installation page 3

6. Hook the chosen fret (sold separately).
Four frets are offered for the Clearview Horizon
front: Clearview 646CCB, Traditional RA24TB,
Contemporary RA24CV, or Ventana 1225VFB.
Note: The Ventana Fret 1225VFB must be fi tted
with the valve shield provided in the Clearview
Horizon kit before being installed on the front.
Remove the 2 screws at the back of the fret, fi t the
shield to the back of the fret, and fi x it with the 2
screws.
Clearview Fret
Ventana Fret
7. Hook the window bolt cover to the top of the
window frame as indicated. Do not hook it to the
fi rebox frame.
Window
bolts
cover
Window frame
Firebox frame
8. Install the barrier screen.
a. Slide the right-hand side tabs between the
3-sided frame front plate and the black backing
plate, resting the bottom tabs on the bottom of
the appliance's black frame.
b. Holding the screen, slide the left-hand top lever
so that its tab goes behind the front plate.
c. Swivel the left-hand side lever so that its tab
goes behind the front plate.
d. Insure that the screen is secure in all corners.
3