Progressive Mode - JVC XV-S500BK Manuel D'instructions

Getting started
To make the Progressive scan mode selection active from the remote control unit
The unit supports the Progressive scan system as well as the conventional Interlace scan system. If your television or monitor
supports the progressive video input, you can enjoy a high quality picture by making the Progressive scan mode active.
If you want to select the scan mode between the interlace and progressive modes depending on the
480p
source condition or when connecting more than one television, you can select the mode from the remote
REMOTE
480i
control unit. To do this, set the scan mode selector on the rear panel to "REMOTE" (See page 7).
¶ When the unit is turned on, and the scan mode selector on the rear panel is set to "REMOTE"
Press and hold down the VFP - PROGRESSIVE SCAN button for a few seconds.
The scan mode switches between the Progressive scan and Interlace scan modes.
• When the scan mode is set to the progressive mode, the PROGRESSIVE indicator on the front panel is lit.
Depending on the "PROGRESSIVE MODE" setting on the "PICTURE" preference display and whether the current
DVD VIDEO disc is film-source or video-source, the color of the indicator differs, as shown in the table below.
(See also pages 7 and 49.)
Setting of

PROGRESSIVE MODE

VIDEO
FILM
AUTO
CH
+
VOL-
ENTER
CH
-
PREVIOUS
CLEAR SELECT
SLOW-
REPEAT SUBTITLE AUDIO
DIGEST ANGLE
3D
PHONIC AMP VOL
RM-SXV008J
REMOTE CONTROL
NOTES
• There are some progressive TV and High-Definition TV sets that are not fully compatible with the unit, resulting in the
unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode. In such a case, use the interlace scan
mode.
• All JVC progressive TV and High-Definition TV sets are fully compatible with the unit (Example : AV-61S902).
To connect to a stereo audio amplifier/receiver
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.
Connect the unit's AUDIO OUT (LEFT/RIGHT) jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio
amplifier or receiver.
The unit
PCM / STREAM
OPTICAL COAXIAL
DIGITAL OUT
Red
NOTES
• When using the unit with a stereo amplifier or receiver, set "ANALOG DOWN MIX" in the "AUDIO" preferences to "STEREO"
(see page 51).
• If your stereo amplifier or receiver has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See "AV
COMPU LINK remote control system" on page 58 for details
8
Source type of DVD VIDEO
Film Source
Red
Green
Green
VOL+
NEXT
STROBE
SLOW+
VFP -
VFP
PROGRESSSIVE
SCAN
ZOOM
PROGRESSIVE
SCAN
RIGHT LEFT VIDEO COMPONENT 480p
Y P P 480i REMOTE
B R
S-VIDEO
AUDIO OUT VIDEO OUT
White
Audio cable (not supplied)
Video Source
Red While stopped in the Progressive scan mode,
the PROGRESSIVE indicator is lit in red
Green
regardless of the "PROGRESSIVE MODE"
Red
selection.
STANDBY
STANDBY/ON
AV COMPU LINK
White
Red
Note
DVD/SUPER VCD/VCD/CD PLAYER
7 3 8
0 STOP PLAY PAUSE
OPEN/CLOSE
PROGRESSIVE
PROGRESSIVE indicator
Amplifier or receiver
IN
LEFT
AUDIO
RIGHT
4 ¢
SKIP