Correct Use; Useful Information; Commissioning - IKA mini G Mode D'emploi

Application
The IKA mini G centrifuge is suitable for se-
®
paration of substances and mixtures of subs-
tances of various densities (max. 1.2 kg/dm
and especially for preparation and processing
of samples of substances and mixtures of sub-
stances.
To be used for:
- Micro-filtration
- Cell separation
- Quick centrifugal separation
Centrifuging time:
1 - 99 minutes
The IKA mini G centrifuge is supplied with two
®
rotors. One rotor is for 1.5 or 2 ml micro-tubes
and one rotor is for 0.2 ml PCR strip tubes.
The rotor for 1.5 or 2 ml micro-tubes allows up
to eight different 1.5 or 2 ml tubes to be centri-
fuged. The adapter supplied for 0.5 ml vessels
also allows up to eight different 0.5 ml tubes to
be centrifuged.
Setting up
it. When setting up the centrifuge, maintain a
safety clearance of 300 mm all around it.
While the centrifuge is running, the safety clea-
rance of 300 mm all around must be kept clear
of persons, objects and hazardous materials.
on the rating plate.
cket in order to supply the device with power.
See the section "Technical data" for the connec-
tion values.

Correct use

- Laboratories
- Pharmacies
3 )
The safety of the user cannot be guaranteed if
the appliance is operated with accessories that
are not supplied or recommended by the manu-
facturer or if the appliance is operated improper-
ly contrary to the manufacturer's specifications
or if the appliance or the printed circuit board
are modified by third parties.

Useful information

The rotor for 0.2 ml PCR strip tubes allows up
to 32 x 0.2 ml PCR strips to be centrifuged.
Both rotors are suitable for applications which
demand relatively low centrifugal accelerati-
on, such as micro-filtration, cell separation and
quick centrifugal separation.

Commissioning

listed in the "Technical data".
-
- Medical practices
If these conditions are
met the unit is ready for
service when the mains
plug has been plugged in.
15