Starting The Engine; Engaging The Auger; Disengaging The Auger; Self-Propelling The Machine - Toro SnowMaster 724 ZXR Mode D'emploi

Starting the Engine

Note: Fully insert the key to start the engine. Turning the
key to the middle position does not start the engine.
Note: Prime the engine in B of
following table:
Figure 9
Figure 9 according to the
Temperature
-23°C (-10°F) and above
Below -23°C (-10°F)

Engaging the Auger

Disengaging the Auger

To disengage the auger, release the auger lever.

Self-Propelling the Machine

To operate the self-propel drive, simply walk with your hands
on the upper handle and your elbows at your sides, and the
machine automatically keeps pace with you
Note: You can self-propel the machine with the auger
engaged or disengaged.

Shutting Off the Engine

To shut off the engine, remove the key from the ignition or
move the key to the middle position.
9
Suggested Number of Primes
3
6
Figure 10
(Figure
Figure 11
11).