Mounting And Accessories - Xylem HYDROVAR Watercooled Instructions Pour L'installation Et L'utilisation

60
50
40
30
20
1 0
0
5 30
Ambient [°C]
Means of protection:
Ask your power supply company which means of protection are required.
Applicable: TN systems, protective circuits, (FI) pulse current-circuit breaker
For each Hydrovar-Watercooled must be used a separate FI protection switch.
3

Mounting and accessories

The Hydrovar-Watercooled has to be directly mounted in the pressure line. The cooling of the unit is done through
the handled liquid.
The Hydrovar-Watercooled has two connections with 1" female thread and one connection with 1" male thread.
The direction of the flow can be chosen in any direction.
rd
The 3 (unused) connection can either be closed (use incl. closing cup) or can be used as the connection for the
pressure tank.
Direct mounting on the pressurized side
of a dry pump
40 50
Indirect mounting in the pipe work with
a submersible pump
14