Conrad Electronic RMR 233 Mode D'emploi page 23

Thermomètre sans fil 3 canaux
Table des Matières

Publicité

c) Reading the temperature
The indoor temperature is displayed on the second line of the LC display.
To have the temperature readings of the individual remote sensors displayed,
briefly press the "CH" button to switch to the next channel.
Channel 1
Channel 2
The reception icon at the top right of the LC display indicates the quality of
signal reception and which channel is activated.
When no signals are received for more than two minutes, blanks "- - - -" will be
displayed for that channel until future signal is successfully received (for
example, caused by short interference).
In such a case, please wait for some minutes and then check the functionality
of the remote sensor or of the inserted batteries, respectively.
You can also try to manually search for the signal. To do this, briefly press the
"CH" and "MEM" buttons at the same time.
If one channel is not used (e.g. if you use just one or two remote
sensors), a blank icon always appears "- - - -" for that channel.
d) Temperature trend display
The temperature trend display shows the direction in which the temperature
measured is moving.
Display
TEMP
Trend
Increasing
46
All manuals and user guides at all-guides.com
Channel 3
Channel 1
....
TEMP
TEMP
Steady
Decreasing
b) Inserting batteries into the base unit
Insert the batteries first into remote sensors, if you have not done
it yet. Otherwise, it may happen that the remote sensors will not be
recognized by the base unit correctly.
• Open the cover of the battery compartment. Before doing this, separate the
table stand from the base unit, if it is required.
• Insert two (AAA) micro batteries into the battery compartment according to
the correct polarity. The respective figure in the battery compartment will
help you to do this, see also figure below.
• Close the battery compartment.
1
When remote sensor batteries are low, a "Battery exhausted"
symbol ("LOW Bat") appears, while activating the respective
channel ("CH" button).
If the batteries of the base unit are low, an icon appears in the
bottom part of the calendar display.
_
+
_
+
2
43

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

65 01 61

Table des Matières