Before First Use - IKEA ENASTAENDE Manuel D'utilisation

ENGLISH
The rinse aid dispenser will remain
activated until you modify the setting again
How to activate the rinse aid dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
to flash and the display is blank.
2. Press .
• The indicators
• The indicator
flash.
• The display shows the current setting:
= rinse aid dispenser
deactivated.
3. Press to change the setting.
= rinse aid dispenser activated.
4. Press the on/off button to confirm the
setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.
Acoustic signals
The acoustic signals operate when the
appliance has a malfunction and it is not
possible to deactivate them.

Before first use

1. Make sure that the current level of the
water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the baskets.
and until
, and
and go off.
continues to
There are also the acoustic signals that
operates when you set the level of the
water softener and when the programme is
completed. By default, this acoustic signal is
on, but it is possible to deactivate it.
How to deactivate the acoustic signals
The appliance must be in programme
selection mode.
start
1. To enter the user mode, press and hold
simultaneously
the indicators
to flash and the display is blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current setting:
–
–
3. Press
4. Press the on/off button to confirm the
setting.
When you start a programme,
the appliance can take up to 5
minutes to recharge the resin in
the water softener. It seems that
the appliance is not working. The
washing phase starts only after
this procedure is completed. The
procedure will be repeated
periodically.
and
, and
.
and
continues to
= Acoustic signal on.
= Acoustic signal off.
to change the setting.
12
until
start
go off.