Hendi 580233 Mode D'emploi page 5

2. Place the first object on the scale for weighting,
then the LED display (2) will show the weight of
the first object. (e.g. Bowl weights 155g)
3. Press the TARE button (1) to reset the display
to zero. Then, "TARE" icon will appear on the
LED display (2).
TARE TARE
4. Now, put another object onto the scale. The
LED display (2) will show the weight of newly
added object. (e.g. Flour weights 85g)
5. If you remove the item added to the scale, the
LED will again show zero. But if you remove all
items from the scale, the LED will show a neg-
ative value indicated by a minus sign.
6. When it shows the negative value, press the
TARE button again, it will clear to zero.
Note: When the scale is overloaded, "EEEE" will be displayed.
ON/OFF ON/OFF
g
TARE TARE
TARE TARE
TARE TARE
TARE TARE
TARE TARE
7. If there is no operation, the scale will switch
off automatically in about 1 minute. Or you
can press and hold the ON/OFF button once to
switch the scale off.
ON/OFF ON/OFF
g
ON/OFF ON/OFF
g
ON/OFF ON/OFF
g
5
EN