Operation; Recording Photos; Recording Videos; Displaying Photographs And Videos - VOLTCRAFT BS-350XIPSD Notice D'emploi

10. oPEraTIoN

a) recording photos
• To record an individual picture with the camera, simply push the button a3 in preview mode.
Keep the connected camera as calm as possible to receive a good recording.
The symbol in the display for photo mode (d3) flashes thrice while the photo is taken.
• All recorded pictures are saved in JPG format, in the sub-folder "PIC001". The numbers of
the folder may also change. The recording folder is in the folder "Photo" on the memory card.
The file name is produced from the current date and time.
b) recording videos
To record videos, you first need to switch the endoscope to video mode.
Once you switch off the BS-350XIPSD, it will automatically be reset to photo mode.
This means that if you want to record a video after switching on, you have to switch
mode first.
• Navigate (a5/a6) to the item "dVr" in the menu and confirm it with the button a3.
The menu is automatically closed and the display shows the symbol for video mode (d2).
• Push the button a3 to start the recording.
During the recording, the video symbol (d2) will flash and the recording time will be dis-
played at the lower left of the display.
• Push the button a3 again to terminate the recording.
• All recorded videos are saved in AvI format, in the sub-folder "vid00001". The numbers of
the folder may also change. The recording folder is in the folder "DCIM" on the memory card.
c) displaying photographs and videos
• To get to the display mode for photographs and videos, open the menu (a7) and navigate
(a5/a6) to the item "Playback". Confirm with the a3 button.
• Use one of the two arrows (a5/a6) to select playback of videos or photographs. Confirm
with the a3 button.
41