Horizon Fitness ELITE E7 Guide D'utilisation page 8

GETTING STARTED
CONNECT WI-FI
The Wi-Fi connection for your Horizon Elite E9 is set up directly on the elliptical. The first time you turn on your machine, you
will automatically be prompted to set up the internet access.
1) Choose from the available wireless networks detected and shown on screen. If you do not see your network, press
E9 REFRESH. If it is still not showing up, you can add it manually via the OTHER option. If you do not want to set up Wi-Fi at
this time, press SKIP. NOTE – You can set up or change your Wi-Fi connectivity at any time under the SETTINGS option on
the home screen.
2) Use the keyboard to enter your Wi-Fi network password. Press
3) The network will have a by it to confirm you are connected to the network.
4) Use the Date and Time setup screen to select your time zone and set the current date and time.
SET UP XID ACCOUNT FOR VIA FIT
Creating an xID account will allow you to save and share workout data using the Via Fit Wi-Fi. Up to four users can be saved on
a machine. Your Horizon Elite E9 elliptical allows you to set up an xID account directly from the console.
1) On the user setup screen, press the CREATE AN xID button.
2) Enter your phone number or another easy-to-remember 10-14 digit number. This will be your account number. Also on this
page, you will select your units of measurement. Press
3) Enter your email address. This must be an email address not associated with any other xID account. Press
4) Follow the software to input account information. Press
5) The final step is to confirm your information and review the terms and conditions. Press
6) Select the xID account or unassigned user profile to log in.
7) If you have previously logged in on this machine, you will be asked to enter your 4-digit passcode. Press
8) If you are logging on to a user profile for the first time, you will be asked to enter your account name and it will now be saved
in that spot. Press to confirm.
9) Next, you will be asked to enter your 4-digit passcode. Press
14
HZ14_OG_Elite_E7_E9_Rev1_4.indd 14-15
to confirm.
CONNECTIVITY
™
to confirm.
to confirm.
to confirm.
to confirm.
GETTING STARTED
You have the following options to start your workout:
A) QUICK START
Simply press GO to begin working out. Time will count up from 0:00.
The resistance level will default to level 1. Incline will default to 0%.
B) SELECT A PROGRAM
1) Press the VIRTUAL ACTIVE or WORKOUTS tiles to select an initial program.
2) Scroll through the options by dragging your finger across the touch screen.
3) Select your Virtual Active course or workout type by scrolling through the options. Press
4) Set workout program information by touching and dragging the number until you reach your desired setting. Press
confirm.
5) Press GO to begin workout.
NOTE: You can adjust the resistance and incline levels during your workout.
C) FINISHING YOUR WORKOUT
to confirm. When your workout is complete, the console will save your workout data. You will be asked to rate your workout by selecting
the corresponding star. Your workout information will stay displayed on the console for 30 seconds and then reset. The
information will be saved to your workout calendar.
TO CLEAR CURRENT SELECTION
To clear the current program selection or screen, press and hold
to confirm.
to confirm.
to
for 3 seconds.
E9
15
7/16/14 2:50 PM