Makita HML01 Manuel D'instruction page 11

1. Loosen the clamping screw, expand the lower
handle to both sides and then move down the
handle forward.
NOTE:
At this time, keep a firm grip on the lower handle so
•
that it does not fall down to the far side from the
tool.
2. Loosen the clamping nut and pivot the upper
handle back.
1. Rear guard
2. Grass basket
012602
3. Take off the grass basket and put the mower in
the upright position.
1
012600
NOTE:
When putting the mower in the upright position, do not
•
hold the handle but use the front grip of the mower.
012420
1
1. Front grip
4. Store the grass basket between the handle and
the mower body.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
2
11