Urmet Ddns Account Setup - Urmet 1093/134M1 Guide Rapide

5. At the end of Active X installation the login screen will be displayed where it is possible to select the Username
(Default: admin), Password (Default: admin), Client Port (Default: 9988), Stream Type (Main Stream, Sub
Stream, Mobile Stream), Quality level (from Real Time to level 3) and Language.
6. Select "login" in order to enter in LIVE screen.
3.1.1

URMET DDNS ACCOUNT SETUP

It is possible to reach the IP CAMERA on the Internet (with or without DDNS) only if the Internet service supplier assigns
a public IP address (static or dynamic) to the router. It is therefore advisable to check this crucial detail with your Internet
provider beforehand.
1. IP CAMERA network parameter setup
The URMET IP CAMERA network configuration is DHCP mode by default (automatic IP address
allocation):
a) If the network to which IP CAMERA is connected supports DHCP, simply display the parameters that the IP
CAMERA acquires automatically from the network in "Remote Settings
or so for the parameters to be allocated and appear automatically in the menu: IP address, subnet mask,
gateway and DNS.
Press APPLY to save the changes.
The IP CAMERA parameters must be allocated manually if the network does not support DHCP. Select
b)
"Type = Static" on the "Menu
and DNS.
Press APPLY to save the changes.
IMPORTANT NOTE:
The DNS fields must be filled in correctly for correct operation of the DDNS system.
DS1093-135
Network" and fill in the following fields: IP address, subnet mask, gateway
26
Network". Wait for ten seconds