Husqvarna 320iHD60 Manuel D'utilisation page 8

loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
• Keep first aid equipment close at hand.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
In this section the product's safety features, its purpose
and how checks and maintenance should be carried
out to ensure that it operates correctly. See instructions
Product overview on page 2 to find
under the heading
where these parts are located on your product.
The life span of the product can be reduced and the risk
of accidents can increase if product maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING:
defective safety components. The product's
safety equipment must be inspected and
maintained as described in this section.
If your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION:
on the machine requires special training.
This is especially true of the machine's
safety equipment. If your machine fails
any of the checks described below you
must contact your service agent. When
you buy any of our products we guarantee
the availability of professional repairs and
service. If the retailer who sells your
machine is not a servicing dealer, ask him
for the address of your nearest service
agent.
8
Read the warning
Never use a product with
All servicing and repair work
To do a check of the keypad
1. Press and hold the start/stop button (A). The product
is on when the LED is on.
A
B
2. Press and hold the reverse button (B). The blades
operates in the opposite direction when LED is on.
3. Press and hold the boost button (C). The blade
speed increases when the LED is on.
To do a check of the power trigger lockout and power
triggers
The power trigger lockout prevents accidental operation.
When you release the handle, the power trigger on rear
handle and the power trigger lockout on the front handle
both move back to their original positions.
1. Start the product.
2. Press the power trigger lockout on the front handle.
C
1777 - 006 - 09.06.2022