GET RX1 RPO Guide D'installation page 2

ENGLISH
A. WARNINGS FOR CORRECT USE
Read all the instructions and warnings carefully before using
the GET RX1 PRO ECUs. Failure to read and/or observe the
instructions and warnings can lead to incorrect use of the device or
its malfunction, resulting in product damage and personal injuries.
RX1 PRO KIT IS INTENDED ONLY AND EXCLUSIVELY
FOR RACING USE.
GENERAL WARNINGS
1. Follow the instructions described in this manual to prevent
vehicle damages.
2. Do not modify or replace the material supplied by GET.
3. Always make sure that no installed part can interfere with the
hot parts of the engine, the steering components or with the rider.
4. The product is not a toy. Keep it out of the reach of children and/or
animals as it contains small sized components that could be swallowed.
5. Do not use the product for purposes other than those specified in
these instructions.
6. Do not use high pressure washers on the product.
SPECIFIC WARNINGS
1. Always make sure that RX1 PRO ECU is properly installed and
functional prior to use.
2. Never expose the device to temperatures above 70°C /158°F.
3. Install it when the engine is cold.
4. The RX1 PRO ECU may not work properly if the OEM TPS
sensor is damaged or modified.
5. The RPM limiter threshold of the RX1PRO maps is higher
than the standard ECU.
EN
2