Disposal - BASETech D90D25ESLRIII-N1 Notice D'emploi

• If the door seal no longer reliably closes due to the accumulation of food residue, microwave radiation may be
emitted, posing a hazard to your health. After use, clean the product after use to prevent mould and pests as well
as the emission of microwave radiation.
• Clean the display, the buttons and the dial with a soft, damp cloth. Prevent the display, the buttons and the dial from
getting wet. Clean these parts with a soft, damp cloth only.
• Remove the glass rotating plate from the cooking chamber and clean it in warm soapy water or in a dishwasher.
• Clean the roller ring and the floor of the cooking chamber periodically to prevent excessive noise. Use a mild
detergent to wipe the surface. Clean the roller ring in warm soapy water or in a dishwasher. If you have removed the
roller ring for cleaning, be sure to insert it again correctly before continued use. It must rotate easily.
• Neutralize odours in the cooking chamber by filling a microwavable cup (see chapter "Appropriate dishes and
kitchen utensils" on page 40) with water, lemon juice and lemon peel and boiling for 5 minutes at full power. Then
wipe the cooking chamber dry with a soft cloth.
• After you have finished cleaning and drying all parts, reinsert the glass rotating plate as described under "b)
Inserting glass rotating plate/grilling plate" on page 42.
• Leave the door open until the cooking chamber has dried completely.

16. Disposal

Electronic devices are recyclable waste and must not be disposed of in household waste. Always dispose
of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
52