Reset Settings; Start Cooking - BASETech D90D25ESLRIII-N1 Notice D'emploi

Configure settings
• The " " symbol flashes in settings mode.
• If you do not press any button for approx. 1 minute after activating settings mode, settings mode is automatically
cancelled. The microwave then switches to standby mode.

Reset settings

• Press the button Stopp/Sperre (22) (stop/lock) twice. All settings are erased. The product switches to standby
mode.
Set the cooking time
• Use the dial Zeit/Menü (23) (time/menu) to set the desired cooking time. Turn the dial Zeit/Menü (time/menu)
clockwise to increase and counter-clockwise to decrease the values.
• Set the cooking time from 10 seconds to 90 minutes. Seconds are indicated with "
MIN
" " and the corresponding adjusted time on the display.
The cooking time can be set in the following increments:
Cooking time
10 seconds - 5 minutes
5 minutes - 10 minutes
10 minutes - 30 minutes
30 minutes - 90 minutes
• The set cooking time is shown on the display (6) as a countdown.

Start cooking

• After selecting the operation mode and making the appropriate settings, press the button Start/Schnellstart (24)
(start/quick start).
• Cooking starts. The countdown starts.
Interrupt cooking
• There are 2 options:
- Open the door (14). Cooking is interrupted. Close the door and press the button Start/Schnellstart (start/quick
start) to continue cooking.
- Press the button Stopp/Sperre (stop/lock) during cooking. Cooking is interrupted. Press the button Start/
Schnellstart (start/quick start) to continue cooking.
• While cooking is interrupted, "
Cancel cooking
• During cooking, press the button Stopp/Sperre (stop/lock) twice. Cooking is cancelled. All settings on the current
cooking program are deleted.
• The product switches to standby mode.
Increments
In 10-second increments
In 30-second increments
In 1-minute increments
In 5-minute increments
" flashes. It goes out as soon as cooking continues.
SEC
", minutes with
43