Setting The Time; Microwave Operation - BASETech D90D25ESLRIII-N1 Notice D'emploi

Enable/disable standby mode
• A beep sounds and the product switches to standby mode when
- In initial start-up operation, the button Stopp/Sperre (stop/lock) is pressed.
- In settings mode, no button is pressed for approx. 1 minute.
- Cooking is cancelled.
- The settings are reset.
- The button Stopp/Sperre (stop/lock) is pressed twice in succession.
• In standby mode, the display light turns off and the current time is displayed.
• Press any button except the button Stopp/Sperre (stop/lock) to wake the product from standby mode. The display
lights up.
e) Setting the time
• In standby mode, press the button Uhr/Programm (25) (clock/program) to access settings mode. The display lights
up and the " " symbol starts flashing.
• Set the desired display format – " HOUR 12" (12-hour format) or "HOUR 24" (24-hour format) – using the button
Uhr/Programm (clock/program).
• Use the dial Zeit/Menü (23) (time/menu) to set the hours. Press the button Uhr/Programm (clock/program) to
confirm the setting. The minutes "00" are shown on the display.
• Use the dial Zeit/Menü (time/menu) to set the minutes. Press the button Uhr/Programm (clock/program) to confirm
the setting.
• The microwave then switches to standby mode. The display shows the set clock time and the "
If you do not press any button for approx. 1 minute after activating settings mode, settings mode is
automatically cancelled. The microwave then switches to standby mode. The clock continues running from
the last input and is shown on the display.
Press the button Uhr/Programm (clock/program) while the microwave oven is in operation. The time is
briefly shown instead of the countdown or remaining cooking times.
f) Microwave operation
This operating mode is suitable for heating and warming up food. You can manually adjust the power level and
cooking time in microwave operation.
Use the product only if the roller ring, the glass rotating plate and the rotating attachment are all in the
correct position. Make sure that the glass rotating plate rotates easily.
• Open the door, place the food in the cooking chamber and close the door.
• In standby mode, press the button Power (17) (power). The "
• Repeatedly press the button Power (power) to set the desired power level (900 W, 750 W, 450 W, 300 W, 150 W,
80 W).
44
" symbol is shown on the display.
" symbol.