Description - Kinetec Spectra Manuel D'utilisation

Description

The device Kinetec Spectra™ consists of the following components:
1 • Lower limb support.
2 • Thigh support.
3 • Articulated foot plate and hand control location for
transport.
4 • Hand control.
5 • Thigh support setting lock.
6 • Lower limb support setting lock.
7 • Foot plate position setting lock.
8 • Transport handle.
9 • ON/OFF switch and fuses.
10 • Liquid-crystal display (2 lines of 16 characters).
11 • SESSION TIME display key.
12 • BYPASS mode key.
13 • MODULATION key.
14 • WARM UP key.
15 • EXTENSION setting key.
16 • FLEXION setting key.
17 • Increase / decrease keys.
18 • START key.
19 • STOP key.
20 • FORCE key.
21 • SPEED key.
22 • PAUSE key.
23 • TIMER key.
24 • PROGRAM access key.
Display Details:
A • 16-character line, used to display various messages
when starting up the machine, then the type of
movement during operation (KINETEC or Warm Up).
B • 16-character line, used to display various messages
when starting up the machine; then it displays the
operational parameters.
C • 3-character area showing the extension limit.
D • 4-character area showing various messages: RUN,
STOP, EXT, FLEX ...
E • 3-character area showing the real-time angle of the
knee; this value changes with the current
movement.
F • 3-character area showing the flexion limit.
G – USB key slot
H – USB key
I – Sliding protective cover
See the Kinetec Data Capture™ software
user manual for more information.
Kinetec Spectra™
3
7
9
4
10
15
17
18
21
22
I
EN
1
6
8
12
13
14
11
16
19
23
24
H
2
5
20
G
5/20