Publicité
Les langues disponibles
Les langues disponibles
EN
Reducer and
buckle
protection
6. Removing the seat cover
1) Remove the shoulder harness and the sheaths (see point 5.4).
2) Unfasten the buckle and remove the buckle protection and the reducer (see point 5.4
and illustration 1 on the next page).
3) Undo the press studs and remove the seat cover (see illustration on next page).
Remark: to replace the seat cover, repeat these operations in reverse order.
Remove
through
slot in
seat's shell
Remove the plastic cover
34
Shoulder
harness
tidied
under the
cover
Publicité
