Teamtex SEATY 360 Manuel page 31

EN
Installation method no.2: vehicle's 3-point safety belt
For children weighing from 9 to 18 kg, FORWARD-FACING installation.
Step 1: As illustrated below, pass your vehicle's 3-point seat belt through the seatbelt guides
of the child safety seat, fasten and firmly tighten the seatbelt. Make sure the vehicle's
seatbelt is well tightened and that it is not twisted.
Step 2: Place your child in the child safety seat, use the 5-point harness to secure your child.
Buckle and properly tighten the harness, make sure the straps are not twisted and that the
height is adjusted to suit your child (refer to points 4.2, 4.3, 4.4, 4.5).
Installation method no.3: ISOFIX + vehicle's 3-point safety belt
For children weighing from 9 to 18 kg, FORWARD-FACING installation.
Step 1: Use the ISOFIX clips to fasten the child safety seat in place. Make sure they are
properly locked, the indicators for each clip should be green. Then push the child safety seat
back until it comes into contact with the backrest of the vehicle's seat (refer to points 4.6 and
4.7).
Step 2: As illustrated below, pass your vehicle's 3-point seat belt through the seatbelt guides
of the child safety seat, fasten and firmly tighten the seatbelt. Make sure the vehicle's
seatbelt is well tightened and that it is not twisted.
Step 3: Place your child in the child safety seat, use the 5-point harness to secure your child.
Buckle and properly tighten the harness, make sure the straps are not twisted and that the
height is adjusted to suit your child (refer to points 4.2, 4.3, 4.4, 4.5).
31