Maintenance; To Clean The Product; Troubleshooting - Menuett 802559 Instructions D'utilisation

5
When the status lamp goes off, open the cover.
4

Maintenance

Warning! Do not dismantle the product, or attempt to
modify or repair it.

4.1 To clean the product

Warning! Disconnect the power cord before you
clean the product.
5

Troubleshooting

Problem
The bag does not seal.
The bag melts.
No response when the vacuum button is
pushed.
The sealed bag fills with air again.
Air is not removed from the bag.
2022_001
Warning! Let the product become cool before you
clean it.
● Liquid from bags can collect in the vacuum chamber.
Wipe with a damp cloth with a mild detergent if it is
necessary.
● Clean excess food, liquid, etc. inside the product with
paper towels.
● Wipe the surface of the product with a soft, damp cloth.
Inspect the seal strip. If the seal strip is creased, wait until the tempreature of
the product has decreased. Carefully remove the strip and correct the
crease, then set the strip in position.
Foods with high liquid content can cause the bag to not be sealed correctly.
Open the bag, wipe the inside clean and seal again.
Make sure that the bag is in the correct position in the vacuum chamber.
Let the temperature of the product decrease for at least 20 seconds between
each seal.
Let the temperature of the product decrease for 25 minutes and try again.
Make sure that the power cord and plug are not damaged.
Use another product to do a check of the power outlet. If the power outlet
has no current, do a check of the fuses.
Make sure that the power switch at the rear of the product is in the ON
position.
Make sure that the vacuum bag is positioned correctly in the vacuum
chamber.
Make sure that the cover is correctly closed.
Let the temperature of the product decrease for 25 minutes and try again.
Inspect the seal. Holes or creases can cause a leakage.
Foods with high liquid content can cause the bag to not be sealed correctly.
Open the bag, wipe the inside clean and seal again.
Inspect the bag for damage and punctures caused by the contents.
Make sure that the vacuum chamber seals are not loose, damaged or worn.
Inspect the bag for damage or incomplete seals.
Make sure that the vacuum chamber seals are not loose, damaged or worn.
Foods with high liquid content can cause the bag to not be sealed correctly.
Open the bag, wipe the inside clean and seal again.
Make sure that the bag is in the correct position in the vacuum chamber.
Action
19