Krüger & Matz EXPLORER KM0552 Mode D'emploi page 13

Owner's manual
OPERATION
Turn on/off
Press and hold the power button for about 2 seconds to turn on the device (blue
backlight of the power button lights up). The device will issue a voice prompt and
automatically enter Bluetooth pairing mode.
Press and hold the power button again to turn off the device (blue backlight of the
power button goes off).
If after pressing the power button, the device is not turning on, it may be due to low
battery. Please charge the battery and try again.
Play/ pause music
Press the play/ pause button.
Previous/ next track
Press the - button to go to previous track. Press the + button to go to next track.
Decrease/ increase volume
Press and hold the – button to decrease volume. Press and hold the + button to
increase volume.
Answer/ end/ reject call
Press the play/pause button to answer/end call. Press and hold this button to reject
call.
Note: Remain within 1 meter from the speaker's microphone for the best call quality.
PAIRING
1. Press and hold the power button for about 2 seconds to turn on the speaker. It
will automatically enter Bluetooth mode* (blue backlight of the power button
blinks quickly).
2. Please keep the speaker and external device close to each other when pairing.
3. Enable Bluetooth function on the external device and search for new Bluetooth
devices.
4. Select and connect with this device (KM Explorer). Enter password "0000" if
necessary.
5. The speaker will issue a voice prompt signifying a successful pairing; blue
backlight of the power button stops blinking.
6. When playing music, blue backlight of the power button blinks slowly. When
music is paused, blue backlight stops blinking.
13