GYS Ergo Lift 650 Manuel D'utilisation Et De Maintenance page 32

Once the area has been determined, place the lift and carry out the reverse manoeuvre without forgetting
to remove the 2 wheels and the pins and store them on the support at the level of the manoeuvring tiller.
OPERATING INSTRUCTIONS
To achieve optimum safety, it is recommended to define an area in which other objects
or walls will be at a certain distance (2m minimum). All ascent and descent manoeuvres
must be carried out with the best possible attention on the part of the operator. Within
the defined area, it is forbidden for people to park when the lift is in motion. In order to
guarantee the operator's safety, the control box must be located at a distance that allows
an escape route in case of emergency. It must be taken into account that the vehicle
will move 30cm towards the front of the lift when going up and down.
Remove the skates
Safety zone
Make sure that the vehicle is as centred as possible on the longitudinal axis of the lift.
Wheel +
pin
2m
Front
2m
Hydraulic power pack
2m
Folded arms
Wheels removed
obligatorily
2m
ERGO LIFT 650
3m min
Back
NO
31