Background Information; Limitations Of Liability - GYS Ergo Lift 650 Manuel D'utilisation Et De Maintenance

Thank you for choosing GYS In order to obtain maximum satisfaction from your ERGO LIFT 650 and for your
safety, please read these operating instructions carefully before first use and keep them in a safe place for
future reference.

BACKGROUND INFORMATION

These operating instructions contain important information for installation in order to ensure proper
commissioning and operational safety of the ERGO LIFT. Complying with the documentation reduces risks
and extends the life of the product. This manual contains a form to certify regular security checks. Use the
"Regular Safety Inspection" form and the "Maintenance Log" to archive the inspections (It is advisable to
make a copy of the forms before filling them in for the first time).
Installation and control:
Safety work and safety checks are reserved exclusively for specially trained persons. These persons are
referred to in this documentation as experts and/or authorised persons.

LIMITATIONS OF LIABILITY

The ERGO LIFT is a mobile lift designed in compliance with standards. All data and advice in this manual
have been collected in accordance with its applicable standards and regulations and our extensive knowledge
and experience.
The manufacturer cannot be held responsible in case of material and physical damage that could lead to
death by:
• Non-observance of the instructions for use
• Improper or dangerous use
• Employment of unskilled persons
• Unauthorized processing on the ERGO LIFT
• Insufficient maintenance
INTENDED INTENDED USE
The ERGO LIFT is designed for the repair of passenger vehicles. It allows vehicles to be lifted safely.
Maximum authorised load capacity of 2,000 kg.
Intended use of the ERGO LIFT includes familiarisation with these operating instructions in their entirety and
observance of all the instructions contained herein, with particular reference to the safety instructions. The
ERGO LIFT must be used and handled in accordance with these operating instructions.
A safety perimeter must be defined in which no one must be present during the lifting operation (minimum
2m around the vehicle to allow escape if necessary).
The lifting of persons or other objects is not allowed. No one must be inside the vehicle to be lifted. It is
forbidden for persons to climb onto the load or the load support device when these are in the raised position.
The ERGO LIFT must be used inside a work room and protected from bad weather (wind, rain and negative
temperature).
The operating temperature range is between 5°C and 40°C maximum. In case of prolonged storage in a place
where the temperature is below 0°C, allow at least 12 hours before use by storing it in the workplace.
Do not use in excessively humid conditions. If water is splashed directly onto the lift, use a clean cloth to wipe
it off.
ERGO LIFT 650
25