Denon DJ Prime GO Guide D'utilisation Rapide page 7

32 33
31
30
36 37
29. Battery Charging Indicator: This LED is solid green while charging. When charging is
complete, the LED will turn off.
30. FX On: Press this button to enable or disable the selected effect.
Hold Shift and press FX On to show or hide the FX bar.
31. FX Select: Turn this knob to select the active effect. Press the encoder knob to commit the
selected FX change. Press and hold Shift and this button to show or hide the FX panel on the
touch screen.
32. FX Time: Turn this knob to decrease or increase the rate of time-based effects. Press the
encoder knob to switch between FX Time and FX Parameter.
33. FX Wet/Dry Knob: Turn this knob to adjust the wet/dry mix of the effects.
34. FX Assign 1: Press this button to assign effect routing to Deck 1.
35. FX Assign 2: Press this button to assign effect routing to Deck 2.
36. Channel Level: Turn this knob to adjust the level of the pre-fader, pre-EQ audio signal for the
channel.
37. Channel EQ: Turn these knobs to boost or cut the high, mid-range, and low frequencies for the
channel.
38. Mic On/Off: Press this button to toggle the microphone signal on/off.
Hold Shift and press Mic On/Off for Mic 1 to turn Talkover on/off, which automatically
reduces the volume level of the master mix when you speak into the microphone.
39. Mic Level: Turn these knobs to adjust the volume levels of the corresponding microphone
inputs. The Peak light next to each knob indicates the current signal level by its color: green
(low), amber (normal/optimal), or red (maximum/peak). You can adjust the microphone
attenuation in the Utility menu.
Important: The audio signals from the microphones are routed directly to the Master Outputs.
40. Booth Level: Turn this knob to adjust the volume level of the Booth Outputs.
41.
Master Level: Turn this knob to adjust the volume level of the Master Outputs.
42.
Eject: Press this button to display a list of connected media devices on the touchscreen. Tap
one of the listed media sources to eject that device.
Press and hold Shift and press this button to open the Source menu.
29
34
35
39
40 41
38
36 37
42
7