Skil 1960 Notice Originale page 5

a
360° Cross-line laser 1960/1961
INTRODUCTION
• The measuring tool is intended for
determining and checking horizontal
and vertical lines
• The measuring tool is suitable
exclusively for operation in enclosed
working sites
• This tool is not intended for
professional use
• Save these instructions for future
reference and include them with
the measuring tool when giving it
to a third party
TECHNICAL DATA
Working range
(approx.)*
Levelling accuracy
Self-levelling range
Levelling time
Operating temperature -5°C to +40°C
Storage temperature
Relative humidity
(max.)
Laser class
Laser type
Tripod mount
Battery
Operating time
Weight
Dimensions (length x
width x height)
* Important: under unfavourable
conditions (e.g. in bright light) the tool's
working range will be reduced
20m (1960),
30m (1961)
±0.5 mm/m
± 4°
≤5 seconds
-20°C to +70°C
90%
2
635nm (1960),
520nm (1961)
1/4"
Li-Polymer, 3.7V,
1200mAh (1960),
2000mAh (1961)
10hrs (1960),
8hrs (1961)
0.44 kg
96 x 73 x 107 mm
TOOL ELEMENTS 1
A Charger interface
B Battery level indicator
C On/Off button / Mode button
D Exit opening for laser beam
E Automatic levelling indicator
F Switch for automatic levelling
/ locking the levelling unit
G Tripod mount 1/4"
H Charger cable
J Laser viewing glasses*
K Tripod*
* NOT STANDARD INCLUDED
SAFETY
• All instructions must be read and
observed in order to work safely
with the measuring tool 2
• If the equipment is used in a manner
not specified by the manufacturer, the
protection provided by the equipment
may be impaired
• Never make warning signs on the
measuring tool unrecognisable
• -The use of other operating
or adjusting equipment or the
application of other processing
methods than those mentioned
here can lead to dangerous
radiation exposure
• Do not direct the laser beam at
persons or animals and do not
stare into the direct or reflected
laser beam yourself, not even
from a distance (you could blind
somebody, cause accidents or
damage your eyes) 4
• If laser radiation strikes your eye,
you must deliberately close your
eyes and immediately turn your
head away from the beam
• Do not make any modifications to
the laser equipment
• Have the measuring tool repaired
only through qualified specialists
using original spare parts (this
ensures that the safety of the
measuring tool is maintained)
• Do not allow children to use
the laser measuring tool
without supervision (they could
unintentionally blind other persons or
themselves)
5