Ezviz C3N Mode D'emploi page 12

How to Set Your PoE Camera?
Option 1: Connect your PoE camera to a PoE Switch/NVR.
Steps:
1. Connect the Ethernet cable to the PoE port of your camera.
2. Connect the other end of the Ethernet cable to the PoE port of your
PoE switch or NVR.
3. Connect the LAN port of your PoE switch or NVR to the LAN port of
a router via the Ethernat cable.
• The LED turning slow-flashing blue indicates that the camera is
connected to the Internet.
• The PoE switch, NVR and Ethernet cable are not included in the
package.
4. Log in to your account using the EZVIZ app.
5. On the Home screen, tap "+" on the upper-right corner to go to the
Scan QR Code interface.
6. Scan the QR code on the Quick Start Guide cover or on the body of
the camera.
7. Follow the wizard to add the camera to the EZVIZ app.
Router
For PoE Port
7
For LAN Port
For LAN Port
PoE Switch/NVR